February 2, 2017 at 11:31 #206683
So I have a 2001 gary fisher marlin, with a 3x drivetrain, and I want to switch to a 1x. Because I am on a budget, I don’t want to buy a new derailer and shifter, so I want to go with a 1×9. Can anyone recommend what size of cassette to get and what chainring? I want to be able to race xc for fun, but also maybe some enduro and street as well. Thanks!
February 2, 2017 at 11:40 #206689
What is the size of your middle ring right now? You can probably get away with using that, and replacing your big ring with a bash guard. Once you do, you can see if your cassette has the range you need.
February 2, 2017 at 11:50 #206692
I believe it is a 32 tooth, do you think that I will have the range I need with that?
February 2, 2017 at 11:53 #206694
If you’re a decently strong rider, and you’re not riding extreme terrain (that is, steep mountains or flat pavement), 32T should give you a good range.
I ride 1×9 and my bike initially came with a 32T ring. A few years ago I moved up to a 34T.
Not sure the exact gear range on the cassette but it’s pretty standard. No bail out ring or anything like that.
February 2, 2017 at 12:57 #206704
You may be able to get away with using your stock ring, but you’ll probably have to add some sort of chain retention device. It may be cheaper to get a narrow wide chainring.
I think you can get a 9 speed cassette with a 34T large cog. As Jeff said, with a 32T chainring and a 34T on your cassette, you should be able to ride just about everywhere.
February 2, 2017 at 20:52 #206751
I did a 1×9 conversion on my 29er hardtail just last week. I have a 11-34 cassette and used a Raceface 30t nw chainring, it only cost $40 with shipping. I’m really pleased with it so far, no problems going up the steep hills or getting up to speed on the flats.
February 3, 2017 at 06:07 #206755
Shimano makes a 9spd cassette with a 12-36 range. Its is the CS-HG400. You will loose lose some top end range but gain on the low end.
It is a heavy cassette, but it shifts well and is durable. I used one for a season on a 29er with a 32t and 30t chainring, depending on the trail.
I would recommend a new chain when you do the conversion. You could even use a 10 speed chain. It will shift fine and stay on the narrow wide ring better since it is narrower. Chain length is key since there are no 9spd derailluers with a clutch. Basically you want the chain as short as possible to keep enough tension on the derailluer cage spring in the smaller cogs, without ripping the derailluer apart if you bottom out in the large cog.
February 3, 2017 at 08:25 #206765
I recently did a 3×9 to a 1×10 conversion on my hardtail.
I bought a 32T raceface chainring on amazon for 25$ and bought a sun race 11-42 cassette also on amazon for 40$. I then bought a rear deraileur and shifter on jenson for around 60$ combined(Sram GX DR and X9 shifter). Swap was super easy and for the price I felt like I got a pretty good deal, especially because I did the work myself.
February 3, 2017 at 10:41 #206800
I converted my 3×9, 22/30/40 with 11-34 cassette to a 1×9 32t oval with a 12-36 cassette. Oval doesn’t work for everybody, but for me I feel I can climb as well as with a 30t front. I still have my old cassette and plan on taking the 11 and 13 from it and replace the 12 and 14 on the new cassette. Also I added a bash ring in place of the 40t so the 32t is centered and I did not need any spacer to correct the chainline.
February 3, 2017 at 11:36 #206845
Thanks for the help everyone! So does everyone think a 32 tooth raceface chainring with a cassette with a 11 or 12-36 will work well for general xc, light enduro, street etc. I only have the one mountain bike, and I want it to work well for just about everything
February 3, 2017 at 13:01 #206863
Also, there are some 12-40 9 speed cassettes if you are OK with wide ratio.
February 3, 2017 at 13:12 #206864
I would go 1×10 and replace your shifter, derailleur, cassette, chain ring and chain. I did this on a 2×9 bike of mine last year and it cost me $180 all-in (SRAM GX shifter & derailleur). I am sure you can get it cheaper now. The NX range is even lower cost. I figure for $150 you should be able to get it done. More than worth the money.
The 11-40 9-speed cassette in one of the links above alone are $139 before taxes/shipping. You can get a 10-speed Sunrace cassette with that spread for $65. And you can go as low as 30t on the chainring. A 30t chain ring with 40t low gear on the cassette gives you a pretty low ratio and you should be fine with that almost anywhere.
February 3, 2017 at 15:30 #206888
Hey guys, I’m still new to this so as I’m reading all this, I find it fascinating but somewhat confusing. Sorry for asking for more of an explanation. I currently have on my 2016 Rockhopper Comp:
Sunrace, 9 speed, 11-36T (I’m assuming the smalles cog is 11 teeth and largest is 36?)
Crankset 2×9 square taper, 36/22T.
I would like to go to 1×10 or 1×11, if possible. I know square taper cranksets are old and outdated.
What kind of upgrade/work would I need for this?
Does a new crankset come with a new bottom bracket?
would I need a new longer/bigger rear hub to accommodate the larger cassette?
please go gentle on me as this is new to me.
And please break it down for me in lamen terms.
I know I could pay my LBS to do this, but I enjoy tinkering/upgrading my bike, so I would like to do as much myself as I can.
- Canyon Spectral CF 9 (Current) vs Santa Cruz Hightower Carbon CC XO1 (2021)
- 2 weeks ago
- Specialize Carve / Shimano M5100
- 3 weeks, 6 days ago
You must be logged in to reply to this topic.